CHIPSM142500
CHIPS142500 ADC module is designed in compliance with the FMC form factor and intended to be used within AMC, VPX, PCI/PCIe, CompactPCI base boards to digitize the analogue signals coming from two independent RF channels. Each RF channel has separate ADC module sending samples to the base board FPGA for processing according to the stated algorithm. The ADC module timing is carried out with the help of the integrated reference crystal oscillator providing ADC module sampling frequency up to 500 MHz. The timing and the clock synchronization signal can be also received from the external source facilitating integration of the module into the data processing system. Programmable clock signals distributor makes it possible to adjust the clock signals shift of the channels. The module is fitted with the integrated status monitoring system (crystal temperature, voltage) accessible by the I2C interface.
General characteristics:
Base board connection form factor: FMC ANSI/VITA 57.1
FMC connector: HPC 400
Front panel connectors: SSMC
Module size (DxWxH): 75x61x10 mm
Cooling type: Air
ADC sampling frequency: 1 to 500 MHz
Analogue signal band: 1.95 GHz
ADC resolution: 14 bit
ADC channels quantity: 2
Integrated system interfaces: SPI, I2C
Data output/timing interface: LVDS
Jitter: ≤ 60 fc
Channel impedance: 50 Ohm
Status monitoring system: Yes
Programmable reference oscillator: 10-500 MHz
Intermodular clock synchronization: Yes
Operating-temperature range: −40 to +85°C
Application:
Signal procession and distribution
Multichannel digital data reception
Systems analysis
Measuring equipment
Radiolocation and communications